GYEON Q2M Water Spot Remover, an effective solution for removing unsightly water spotting deposits from paintwork.
Water spotting occurs in hard water area and from regular rainfall as the water evaporates from the surface leaving behind calcium and mineral deposits, a problem that is most obvious in summer. GYEON Q2M Water spot is a mild acid cleaner that gently dissolves these deposits from the paintwork.
Following the wash process, dry the vehicle and spray directly onto a microfiber cloth and wipe the area affected with water spots. If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with a soft microfibre cloth.
GYEON Q2M WaterSpot is thick and oily, so very little product is required to cover a large area. It does not diminish or dry fast, allowing the affected area to be wiped multiple times.
From our experience,
Rather to have than not have when applying coatings to vehicles all over the country and beyond, the water hardness will differ along with clients maintenance. As coatings still develop for days & weeks after install there is a higher risk for this to happen during this period, this is why its advised not wash the vehicle for up to 7 days minimum after a coating has been applied. However if you do develop any water spots this is you go to product, make sure the surface is clean, then use in small moderation directly onto a soft microfibre towel gently rubbing the affected area until dry. We recommend a final wipe down over the entire panel with Gyeon Q2M Cure as this acts a paint sealant.
Features & Benefits:
500ml Bottle with sprayer
Gyeon Q2M Clay Coarse has been designed to be completely safe on all types of paint, effectively removing all types of contamination even on soft and hard paint types.
Gyeon Q²M Bug & Grime, a highly effective but safe product for removing tough stains on paintwork such as general road grime and unwanted bug splat.